Other
$210.00
Assorted aluminum headset stack spacers are precision cut to ensure proper headset function.
$95.00
Replacement handlebar display unit specifically for your Townie GO! 7D bike.
Product details:
- 22.2mm handlebar mount
- Compatible with Townie GO! 7D only
$44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$41.99
Trek proprietary headset spacers compatible with Trek Knock Block model bikes.
- 3 pack of 10mm spacers specific to the Knock Block system
- Not to be used on a standard headset system
$37.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$31.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$27.00
RockShox 35mm Seal Kit
$26.99
Key features:
- Cable actuated remote lever for the Bontrager Drop Line dropper seatpost
- Also compatible with most other cable-actuated dropper seatposts
- Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains
- Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement
- Use with: Drop Line Seatpost
$26.00
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$24.99
Get back on the trail with a quality replacement hanger.
- Original equipment replacement rear derailleur hangers
- Attachment hardware is sold separately
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$22.05
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$22.05
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$21.95
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details
$20.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$20.99
Don't be left hanging.
- Universal Derailleur Hanger - or UDH - offers greater derailleur protection
- Designed to rotate rearward in event of an impact
- Works with all drivetrains
- 30mm washer provides full coverage over ABP bearing seals
- Included attachment hardware is reverse threaded
$20.00
ABI Headset Bearing for new builds or replacements.
$20.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$19.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 142x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$18.00
RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
- Weight: 12g
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$17.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
Page 1 of 3
Next page